Incredibly Easy Steps To Building An Elevated Stone Deck
If you’re getting ready to build a deck, why not make it stand out and be a little bit different than all of the other back garden structures on your street? What number of your neighbours have raised stone decks? Probably not a lot, but that figure is sure to increase quickly when they see how attractive a stone deck can be and especially, how straightforward they’re to build; of course, you might want the simple part to stay your small secret.
Building a raised stone deck is similar to conventional wood construction, but by adding 1 or 2 additional steps you can finish up with a beautiful deck that is anything but conventional.
Raised Stone Deck Construction Steps
The first steps of building your stone deck are much the same as constructing a wood deck, but before starting you must work out your finished elevation. Most house owners have an exterior door which will open onto their finished deck and would prefer that their decking material fits under the lip of that door’s threshold. If you are nervous about water running from the deck surface into your house, you can also drop the top of the deck down a bit and create a tiny step into your home.
After you’ve determined your deck’s finished height, you may then eliminate the thickness of your stone. Stone thickness may vary so you might want to choose the exact decking materials you plan to use. You can then subtract out the 1.5 inch thickness of your Silca Grate support squares. Silca Grate is an underlayment decking material that gives a base for your stone surface. The height that you finish up with after these eliminations is the completed elevation the top of your deck joists should be when your structural framing is complete. The original steps are:
-
Mark and dig the footing holes for your deck support posts
-
Secure the deck ledger board to your house – be certain to flash it correctly to prevent future leaks
-
Briefly brace your deck support posts in place as you install your edge joists at the right height
-
Install interior joists – all joists should be at least 2″ x 8″ lumber and placed on 16 in. centres. Joist crowns should face up
-
Install cross blocking and hangers as required
-
Silca Grates can then be screwed to the head of the deck joists – Silca Grate joints should be staggered if possible
-
If you plan to use sand between your stones, a Geotextile or landscape blanket can be installed over the Silca Grate
-
Install your stone
-
Edge rafters can be covered with aluminium for easy upkeep
-
Set up your table and chairs to have dinner on your new raised stone deck
Decks ought to be built using plans accepted by your local jurisdiction and any required inspections should be prepared and passed before heading off to the next phase of construction. Silca Grate may also be used to convert existing wood decks into elevated stone decks with some small alterations. You may want to substitute brick or pavers for the stone on your deck, but do not forget to take into consideration the difference in material heights.
Silca System – new decking materials. Changing the deck building industry. See how this revelotionary product makes it straightforward to transform a wood deck into a stone deck.
Mail this post
Tags: build your own deck, Building a deck, composite decking material, decking materials